Service

Custom Kitchen Cabinets in Simi Valley

Straightforward custom kitchen cabinets from Marroquin Painting and Carpentry. Upfront quote, workmanship guaranteed, no surprises on the invoice.

A kitchen stops working long before it falls apart. The drawers don't close flush, the layout forces awkward dance-arounds at the stove, and stock cabinet sizes leave dead corners that collect clutter. Maybe you've bought an older Simi Valley home where the original cabinetry was built for a different era, or you're finishing a gut renovation and need cabinetry that actually fits the room's dimensions rather than the other way around. Custom kitchen cabinets are the answer when off-the-shelf boxes can't accommodate your ceiling height, your island dimensions, or the way your household actually uses the space.

The process begins with an on-site measurement session and a design review where layout, door style, wood species, and finish are worked out before a single board is cut. Solid wood face frames and doors are built in the shop, finished by spray application—paint or stain—before arriving on site, so edges and interiors get full coverage rather than a brushed-on afterthought. Soft-close hinges and full-extension drawer slides are included as standard, not upgrades. Once cabinets are installed, any remaining finish work is touched up in place. The project is covered by a written two-year workmanship warranty on all cabinet construction.

Marroquin Painting and Carpentry has built custom kitchen cabinets for homeowners throughout Simi Valley, from tract homes in Wood Ranch to craftsman-style properties in the older neighborhoods near downtown. A well-executed set of custom cabinets changes how a kitchen feels on a daily basis: doors that align cleanly, drawers that open without a lift-and-pull, and storage that fits your actual cookware instead of a national retailer's average household. The free in-home design consultation is where that process starts—no commitment, just measurements and a conversation about what the space needs.

What's Included

Every custom kitchen cabinets visit includes

  • Solid wood face frames and doors
  • Soft-close hinges and drawer slides standard
  • Painted or stained in-shop before install
  • 2-year workmanship warranty

Free in-home design consultation

Common Questions

Custom Kitchen Cabinets — questions we get a lot

Custom cabinet projects in Simi Valley typically run $12,000 to $35,000+ depending on linear footage, wood species, door style, and finish. A galley kitchen with painted maple shaker doors and soft-close hardware tends to sit in the low-to-mid range; walnut or inset-door kitchens with specialty storage push higher. We provide a line-item quote after an in-home measure, no surprise charges mid-project.

Yes, when the boxes are structurally sound. Refacing or refinishing keeps the existing cabinet carcasses and replaces only the visible parts: doors, drawer fronts, exposed side veneer, hinges, and pulls. Typical cost runs 30-40% of a full custom replacement. The catch: if boxes are water-damaged, warped, or built from particleboard that's falling apart, refacing is throwing good money after bad and we'll tell you so.

See all FAQs
Free Estimate

Get a free custom kitchen cabinets estimate

Tell us what you need and we'll come measure it. Written estimate, no obligation, anywhere in Simi Valley and the surrounding Ventura County area.

Rather talk? (747) 347-6525

Service Area

We proudly serve Simi Valley, CA and surrounding areas within Ventura County

Simi ValleyThousand OaksMoorparkCamarillo
Also Available

Other services we handle

Full list on our services page.

Cabinet Refacing & Refinishing

Reface or refinish cabinet boxes that are structurally sound, typically 60-70% less than full replacement. We replace doors and drawer fronts, apply matching veneer to exposed box sides, and install new hinges and pulls. Refinishing option strips and re-stains or paints existing doors in our shop. Most kitchens finish in 5-10 working days with your cabinets usable most of that time. Perfect for solid oak or maple boxes that just look dated.

Learn more

Interior Painting

Professional interior painting services using premium low-VOC paints and expert techniques for flawless results. Scope includes full prep (patching, caulking, sanding, priming bare spots), masking of floors and furnishings, cutting in by brush, and two finish coats by roller or sprayer depending on surface. Sherwin-Williams and Benjamin Moore product lines. Average whole-house interior repaint runs 5-8 working days. 2-year warranty on paint adhesion and peeling.

Learn more

Exterior Painting

Protect and beautify your home's exterior with high-quality paints designed to withstand California weather. We pressure wash, scrape loose paint, spot-prime bare wood and stucco, caulk cracks around trim and windows, and apply two coats of UV-resistant exterior paint. Stucco, wood siding, trim, fascia, and doors all covered. Typical single-story Simi Valley home: 4-7 working days. 5-year warranty on paint film adhesion against peeling and blistering.

Learn more

Trim & Molding Installation

Install, replace and match trim and molding, including custom-milled profiles for older Simi Valley homes. Baseboards, casings, crown, chair rail, and wainscot all handled. For older homes with discontinued profiles, we can mill matching trim or source period-correct stock. Includes nail-hole filling, caulking at all joints, sanding, and two coats of paint. A typical room (base and casings) takes 1-2 days installed and painted.

Learn more

Built-In Storage Solutions

Custom built-ins, shelving and storage designed and fitted to the room. Living room bookcases, bedroom closets, mudroom benches, home office walls, garage organization, under-stair storage. Design starts with measurements and a sketch review, then shop construction and on-site install with trim scribed tight to walls and ceilings. Finished and painted to match surrounding walls. Typical built-in project: 2-3 weeks from approval to installed and finished.

Learn more

Door & Window Installation

Install and replace interior and exterior doors and windows, finished and painted to match. Includes removal and disposal of old units, framing adjustments where needed, flashing and weather-sealing on exterior installs, insulation around the frame, interior and exterior casing, caulking, and paint. Single interior door typically done in half a day; exterior door or window usually one full day. Weather-tight installations backed by a 2-year warranty.

Learn more

Let's get it done.

Not sure which service fits? Call us and we'll help you figure it out — free, no pressure.

Custom Kitchen Cabinets in Simi Valley, CA

Marroquin Painting and Carpentry builds custom kitchen cabinets sized to your actual kitchen — ceiling height, island footprint, corner layout, and all.

Built for Simi Valley Kitchens Specifically

Simi Valley's housing stock spans a wide range — 1960s and 70s tract homes in areas like Wood Ranch where ceiling heights and soffit depths vary unit to unit, older craftsman-influenced properties near the historic downtown core, and newer construction in the hills where open-concept layouts put the kitchen on full display. Stock cabinets are designed around a national median. They do not account for the soffit that drops two inches too low, the return wall that kills a standard run, or the peninsula that needs a finished back because the dining room is right there.

Custom cabinets are built around a site measurement, not a catalog. Every dimension is taken in the actual room before design is finalized, which means the finished installation fits the way the space was framed — not how a box store guessed it might be.

The Ventura County climate is mild, but kitchens still take heat, steam, and grease daily. Face frames and doors are built from solid wood and finished with a sprayed application — paint or stain — before they arrive on site, so edges and interior corners get full, even coverage. That finish holds up to daily use better than a brushed coat applied after install.

When Custom Makes More Sense Than Stock

There is a practical decision behind every cabinet project: does the existing box structure still hold up, or does the kitchen need to be rebuilt from scratch? If the cabinet carcasses are solid — no water damage, no warping, no delaminating particleboard — refacing or refinishing is often the right call and costs considerably less than full replacement. Marroquin handles both, and will say plainly which one actually fits the situation after seeing the kitchen in person.

Full custom becomes the clear answer when the layout itself is the problem. A kitchen that forces sideways shuffles between the island and the range, that has a dead corner nothing fits, or that simply does not have enough storage for how the household cooks — those are layout problems that refacing cannot fix. Custom cabinets let the storage be designed around the room and the people using it: drawer stacks where base cabinets would waste space, tall pantry pulls where a wall allows, upper cabinets that run to the ceiling instead of leaving a dust-collecting gap.

The free in-home consultation is where that conversation happens. Measurements get taken, the existing layout gets assessed, and options are laid out without pressure either direction.

Common questions

How long does a custom kitchen cabinet project take from first visit to finished install?
Timeline varies by kitchen size and finish complexity, but the sequence is consistent: in-home measure and design consultation first, then shop fabrication, then installation and on-site touch-up. Fabrication is where most of the calendar time sits — solid wood construction and in-shop finishing take time to do right. A realistic schedule is discussed and put in writing before work begins so there are no surprises around the kitchen being out of service.
Can you match the cabinet style to the rest of my Simi Valley home's existing woodwork?
Yes. Door profiles, wood species, and stain or paint color are all chosen during the design consultation with the existing trim, flooring, and finishes in the room taken into account. Marroquin also handles trim and molding installation, so if the new cabinets need crown or updated casing to tie into the room, that work can be folded into the same project.
Do I need permits for custom kitchen cabinet installation in Simi Valley?
Cabinet replacement — swapping out or adding cabinets in place — typically does not require a permit in Simi Valley when no structural walls, electrical panels, or plumbing rough-in is being moved. If the project involves relocating a gas line, moving a load-bearing wall, or changing the electrical layout, permits would apply to that scope, not the cabinetry itself. Any permit questions specific to your project are worth confirming with the City of Simi Valley Building and Safety Division before work starts.

Call (747) 347-6525

Call (747) 347-6525